|
|
This Millsaw File is of rectangular section and used primarily for sharpening mill or circular saws.Single cut teeth on both sides and edges.Has two round edges.Overall Size excluding tang is approx 204 x 20 x 4mm Second Cut.Tanged |
|
GBP 6.02
Full details
|
|
|
|
Single cut teeth for sharpening round hooded chain saw teeth.Safe point and efficient tooth design.Length 150mm 6in.Diameter. 18in. |
|
GBP 1.50
Full details
|
|
|
|
Single cut teeth for sharpening round hooded chain saw teeth.Safe point and efficient tooth design.Length 200mm 8in.Diameter. 14in. |
|
GBP 1.50
Full details
|
|
|
|
Single cut teeth for sharpening round hooded chain saw teeth.Safe point and efficient tooth design.Pkt 3 Length 200mm 8inDiameter 532in |
|
GBP 4.32
Full details
|
|
|
|
Triangular, untanged, edges tapering towards both ends. The surfaces and edges are single cut from both points towards the centre.Handle included.For sharpening saws with 60 brvbar angle.No tang but tapered at each end and supplied with a plastic han |
|
GBP 4.80
Full details
|
|
|
|
Triangular, untanged, edges tapering towards both ends. The surfaces and edges are single cut from both points towards the centre.Handle included.For sharpening saws with 60 brvbar angle.No tang but tapered at each end and supplied with a plastic han |
|
GBP 5.06
Full details
|
|
|
|
Triangular, untanged, edges tapering towards both ends. The surfaces and edges are single cut from both points towards the centre.Handle included.For sharpening saws with 60 brvbar angle.No tang but tapered at each end and supplied with a plastic han |
|
GBP 5.48
Full details
|
|
|
|
A single ended triangular saw file, single cut. For dovetail sharpening and other fine toothed sawsSize 100mm 4inSide 3.16inTanged |
|
GBP 3.17
Full details
|
|
|
|
A single ended triangular saw file, single cut. For dovetail sharpening and other fine toothed sawsSize 150mm 6in Side 932inTanged |
|
GBP 3.90
Full details
|
|
|
|
A general purpose file suited to agricultural use that isself handled and flat with parallel sides.The teeth are single cut and the file has two safe edges and a hanging hole in the handle.Length. excluding handle 200mm. 8in. |
|
GBP 9.20
Full details
|
|
|
|
For general work on iron and steel. Slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size 150mm 6inCut flat bastardTanged. |
|
GBP 3.96
Full details
|
|
|
|
For general work on iron and steel. Slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size 200mm 8inCut flat bastardTanged. |
|
GBP 4.76
Full details
|
|
|
|
For general work on iron and steel. Slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size 250mm 10inCut flat bastardTanged |
|
GBP 6.49
Full details
|
|
|
|
For general work on iron and steel. Slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size 300mm 12inCut flat bastardTanged. |
|
GBP 9.40
Full details
|
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size 150mm 6inCut flat secondTanged |
|
GBP 4.08
Full details
|
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size 200mm 8inCut flat secondTanged |
|
GBP 4.84
Full details
|
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size 250mm 10inCut flat secondTanged. |
|
GBP 6.62
Full details
|
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size 300mm 12inCut flat secondTanged. |
|
GBP 10.12
Full details
|
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size 350mm 14inCut flat secondTanged. |
|
GBP 14.88
Full details
|
|
|
|
For general work on iron and steel.Slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size 150mm 6inCut flat smoothTanged |
|
GBP 4.16
Full details
|
|