|
|
THE name for chisels.6mm 14 in up to 32mm 1 14 in 38mm 1 12 in and 50mm 2 in worth over uacute35 included!As Seen On TVBevelled edges for ease of use. |
|
GBP 59.95
Full details
|
|
|
|
The Push Pin is designed to drive panel pins into hardboard and plywood without bending them.The pin is held in the brass barrel by a magnetic plunger and, once the pin has been driven into the hardboard or plywood, the spring action leaves ... |
|
GBP 18.15
Full details
|
|
|
|
This Bradawl has a square section blade which is tapered to a fine point to allow quicker penetration without splitting the wood.The handle is made from beech wood and fitted to the blade with a brass ferrule.Size 1 38in.T... |
|
GBP 6.54
Full details
|
|
|
|
This cutting gauge has a rosewood body and stock with a sealed finish.The thumbscrew is brass and the steel blade is held in place by a brass wedge.The blade can be used for marking or cutting strips of wood veneer and small rebates. |
|
GBP 18.87
Full details
|
|
|
|
This combination mortice and marking gauge is made of sealed rosewood. Has a brass pull slide to adjust the extra spur for use as a mortice gauge.A knurled brass thumbscrew is used to secure the stock.... |
|
GBP 31.55
Full details
|
|
|
|
This combination mortice and marking gauge made of sealed rosewood incorporating brass facing strips.Knurled brass stock fixing screw and hardened steel spur to allow the gauge to be used for ordinary marking.... |
|
GBP 50.04
Full details
|
|
|
|
This Try Square has a sealed hardwood stock faced with brass for extra protection against damage and to give longer life and better accuracy.It has a hardened steel blade which is secured by three steel rivets with brass washers, preventing ... |
|
GBP 36.95
Full details
|
|
|
|
This Try Square has a sealed hardwood stock faced with brass for extra protection against damage and to give longer life and better accuracy.It has a hardened steel blade which is secured by three steel rivets with brass washers, preventing ... |
|
GBP 25.84
Full details
|
|
|
|
This Try Square has a sealed hardwood stock faced with brass for extra protection against damage and to give longer life and better accuracy.It has a hardened steel blade which is secured by three steel rivets with brass washers, preventing ... |
|
GBP 30.28
Full details
|
|
|
|
This Sliding Bevel is made with a sealed rosewood stock.The blade is joined to the stock with a quick release brass locking lever.The slot in the hardened steel blade allows the user to accommodate a wide range of different size work p... |
|
GBP 23.61
Full details
|
|
|
|
This Sliding Bevel is made with a sealed rosewood stock.The blade is joined to the stock with a quick release brass locking lever.The slot in the hardened steel blade allows the user to accommodate a wide range of different size work p... |
|
GBP 22.90
Full details
|
|
|
|
Made from high carbon steel, hardened and tempered to 470 vickers and polished to give a smooth finish.These scrapers have good edge retention but are easily re sharpened.Type 5in rectangle flat 125mm.... |
|
GBP 4.12
Full details
|
|
|
|
Made from high carbon steel, hardened and tempered to 470 vickers and polished to give a smooth finish.These scrapers have good edge retention but are easily re sharpened.Type. Gooseneck Flat... |
|
GBP 7.58
Full details
|
|
|
|
Made from high carbon steel, hardened and tempered to 470 vickers and polished to give a smooth finish.These scrapers have good edge retention but are easily re sharpened.Type. Hollow. Flat... |
|
GBP 7.58
Full details
|
|
|
|
Blade, bolster and tang forged from one piece of steel with edges bevelled to enable easier working in tight corners.Fitted with 2 tone splitproof plastic handle which will withstand heavy usage.The set of 6 contains 1 each of ... |
|
GBP 59.95
Full details
|
|
|
|
Blade, bolster and tang forged from one piece of steel with edges bevelled to enable easier working in tight corners.Fitted with 2 tone splitproof plastic handle which will withstand heavy usage.Size. 1.12in 38mm.... |
|
GBP 31.44
Full details
|
|
|
|
Blade, bolster and tang forged from one piece of steel with edges bevelled to enable easier working in tight corners.Fitted with 2 tone splitproof plastic handle which will withstand heavy usage.Size. 1.14in 32mm.... |
|
GBP 25.69
Full details
|
|
|
|
Blade, bolster and tang forged from one piece of steel with edges bevelled to enable easier working in tight corners.Fitted with 2 tone splitproof plastic handle which will withstand heavy usage.Size. 12in 12mm.... |
|
GBP 17.78
Full details
|
|
|
|
Blade, bolster and tang forged from one piece of steel with edges bevelled to enable easier working in tight corners.Fitted with 2 tone splitproof plastic handle which will withstand heavy usage.Size. 14in 6mm.... |
|
GBP 17.02
Full details
|
|
|
|
Blade, bolster and tang forged from one piece of steel with edges bevelled to enable easier working in tight corners.Fitted with 2 tone splitproof plastic handle which will withstand heavy usage.Size. 18in 3mm.... |
|
GBP 20.95
Full details
|
|