|
|
Hand reamers have a square on the end of the shank which allows placement into a wrench which the user rotates by hand. Used for opening out and finishing existing holes to H7 tolerance in most ferrous and non ferrous metals.Flute Geometry 7 brvbar H |
|
GBP 37.75
Full details
|
|
|
|
Hand reamers have a square on the end of the shank which allows placement into a wrench which the user rotates by hand. Used for opening out and finishing existing holes to H7 tolerance in most ferrous and non ferrous metals.Flute Geometry 7 brvbar H |
|
GBP 26.64
Full details
|
|
|
|
Flute geometry 7 brvbar Left Hand Spiral.Bevel Lead 45 brvbar a side.Used for opening out and finishing existing holes to H7 tolerance in most ferrous and non ferrous metals.To obtain the best results when using reamers it is essential to make them w |
|
GBP 31.08
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 16.81
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 16.81
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 50.45
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 16.81
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 23.03
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 23.03
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 69.05
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 23.03
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 30.28
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 90.34
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 30.28
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 34.57
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 34.57
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 103.75
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 34.57
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 54.84
Full details
|
|
|
|
Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. The t |
|
GBP 13.87
Full details
|
|